<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 7076] [<64-Bit>]  -->
<ImplantLibraryEntry xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>-1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <ScrewFilename>ZFX09-ZB-EX-GTS.sdfa</ScrewFilename>
  <DisplayInformation>GenTek | EX-HEX | SA</DisplayInformation>
  <IsWithInterface>false</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <SupportOrientation>-1</SupportOrientation>
  <Supplier>GenTek™ | External Hex by Zimmer Biomet

Zfx GmbH
Kopernikusstraße 27
85221 Dachau
Germany</Supplier>
  <SupplierLink>http://www.zfx-dental.com</SupplierLink>
  <LegalInformation>To be used for testing purposes only - not for production</LegalInformation>
  <WarrantyInformation>DISCLAIMER OF WARRANTY
  
  
THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.2</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-34_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-34.sdfa</SupportFilename>
      <ImplantFilename>ZB-EX-34_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 3.4 | Engaged</DisplayInformation>
      <Keyword>ZB-EX_TI_34</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.2</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-34_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-34_NE.sdfa</SupportFilename>
      <ImplantFilename>ZB-EX-34_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 3.4 | Non engaged</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>ZB-EX-NE_TI_34</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.55</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-41_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-41.sdfa</SupportFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true" />
      <ImplantFilename>ZB-EX-41_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 4.1 | Engaged</DisplayInformation>
      <Keyword>ZB-EX_TI_41</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>1.55</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-41_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-41_NE.sdfa</SupportFilename>
      <ImplantFilename>ZB-EX-41_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 4.1 | Non engaged</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>ZB-EX-NE_TI_41</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-50_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-50.sdfa</SupportFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true" />
      <ImplantFilename>ZB-EX-50_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 5.0 | Engaged</DisplayInformation>
      <Keyword>ZB-EX_TI_50</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-50_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-50_NE.sdfa</SupportFilename>
      <ImplantFilename>ZB-EX-50_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 5.0 | Non engaged</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>ZB-EX-NE_TI_50</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.5</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-60_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-60.sdfa</SupportFilename>
      <PremillAbutmentColliderFilename IsDesignConstraint="true" />
      <ImplantFilename>ZB-EX-60_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 6.0 | Engaged</DisplayInformation>
      <Keyword>ZB-EX_TI_60</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <RegistrationClickCenter>
        <x>2.5</x>
        <y>0</y>
        <z>-8</z>
      </RegistrationClickCenter>
      <AxisAsymmetric>
        <x>-1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZB-EX-60_SA-Scanbody.stl</MarkerFilename>
      <SupportFilename>ZB-EX-60_NE.sdfa</SupportFilename>
      <ImplantFilename>ZB-EX-60_Scananalog.sdfa</ImplantFilename>
      <DisplayInformation>EX 6.0 | Non engaged</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>ZB-EX-NE_TI_60</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution S</DisplayInformation>
          <Keyword>small</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution M</DisplayInformation>
          <Keyword>medium</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution L</DisplayInformation>
          <Keyword>large</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>-1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <DisplayInformation>Print resolution XL</DisplayInformation>
          <Keyword>xlarge</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>X15WCyy1MmsOCMFWDM44Zu2StleMFZHTs8szCsHWJ+RrCJ6JMkZBiCunFbwZHdFfYEO7PHyU780qRbME9PojNw==</InfoSignature>
  <InfoSignatureV3>LpDy98K56D6Nd75VKazCZeqXL6oOCHO21ORpI9qwVivhgurx3WY3Cj+FPjErElolBLyRuyNRUHFJgfn+KybodGgZTJRW1RLiu0Uk51RfVoaM5JjOJ1akih2+GCvzShTklzTHLhcVlh85e2WyFsHMOumlBUWeu19CPqYL0EzGIHCcofVOp8A899fCjFUVB0YmSwGKQkBsQiLOEcfhAv9dRwvl+GI5HhIupM6ho2Mj7l7PYa1PosOxaK+OZfximkTHGU1kiMf3GuTEbDplBvpDcNi95zCLw6E8ihAM7F1Z1Mozs0K+2L1BOEPByd+3Ppz40NEQWEc5bTAnTKQ/ml9uBA==</InfoSignatureV3>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename>ZFX09-ZB-EX-GTS.sdfa</Filename>
      <Signature>+zUO5PhnEathAVXCqOeXbIcehUR3NHEeyyXDnVjdfSPboWStJVglLlmzbuNkIfDp0ZIwlNkQQl/HDUgRDypMBA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-34_SA-Scanbody.stl</Filename>
      <Signature>dG6oPHmzOhApnBD5oB6i0/7WWf48lEviCc+NN4p4UJ9xgUf7BVtOlpFE1lnOlDBsQDYvY5/KIbHgAxtH9Scmjw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-34.sdfa</Filename>
      <Signature>50g6CfL09ZQKaaRWfAqS6TfmzYhWwpPiMiKVlWqu7vilYCgOdwpIhD7FlvWWktaaNJc9qliYEXQJYd3KCIq/pA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-34_Scananalog.sdfa</Filename>
      <Signature>tbNytjp+YMMSeBHfN+upykUDookACXwiHfPqRjIVC6ItTu7dCGQRaSuZLy8P71XFqYxZN4xZaOJ1x2pS0FkhcQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-34_NE.sdfa</Filename>
      <Signature>jQdPaf8PjkQtgQqkEuAqkXFTgpm6ep1rWbXWxDq0mkpzf+uCKqdrEGPNcdthbf81sDY9Mk4ytXJNUiOBps41Wg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-41_SA-Scanbody.stl</Filename>
      <Signature>MWDsIKSNeQiHfD4A1WYxCKPPSNAUmZT0bRQuioFNddBiH1jGibkKvcSub7D2mXWmFUSaDas2z5c7ri/QVbGlNQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-41.sdfa</Filename>
      <Signature>Im5InvDQ4VEZqoTEL6uWeOI/evwqKE5PexcMtTSs38lLsbO8saOZjSFaI+Nsj50SOUZwRhMvJk+uDMVvb09/Cg==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-41_Scananalog.sdfa</Filename>
      <Signature>p5mxUb1BRwSyOLpYfpBs+vJG39i4QJqgx26pX3Brd8D6Jd5L3Rp4pcOvulNaVT7DeUjB9I7fAzxmku/MR6jlNw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-41_NE.sdfa</Filename>
      <Signature>iusCSb6KB1rp0j9HMmY3KWS2Qq56qS2N341HQzfvKFvdHGS+ifi9W2beiLAfVPP1dj1Yi5Vffmms3AumqjJ7jA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-50_SA-Scanbody.stl</Filename>
      <Signature>Et8cARPE5vL7mHh7li2qX2xKmPqN2/G91ypKQ+i8iuaD+mQFZBsF+fVPDb3rcSRxXmRP4r/9F9zwaLuqQyEVUw==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-50.sdfa</Filename>
      <Signature>giyV1Xh9zjg5rcxhPtGG2y1qCLaFOHMXPNc4oPzmXSiuC5xc9tuG9kJeT4qrM2mjJVVGDWs6zSMxnz0rFl48KQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-50_Scananalog.sdfa</Filename>
      <Signature>OeFdf9GphMUp6S9jppKnNXBz7g6ePqnd7PgwwuoZsiE7q/7ew++EYA83ha7e18UFsgMwq9e91zbeAKFznLq4+w==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-50_NE.sdfa</Filename>
      <Signature>vw93k0xh3Q3R5ORVllDtKYyMESMrF3SP0BuVhrsduPmTvs8V+OfFngZz9yLCm6pc5NwJXAlt4nq52A5VwDBEcQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-60_SA-Scanbody.stl</Filename>
      <Signature>vV/HiH2VmATfjA2Aq6czfSGFTt8XTUCopRnRMtX9jHG0ZMwTaDHvy4JUo2fYEj1Nnu+wjaS+4gIiICYzVaSlJQ==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-60.sdfa</Filename>
      <Signature>Thso+y/Uxnw12iAaHPnDT5mJhLgeFpj0ptzcS82xScXFEZdfemVq6vrW9nTrRNb7GLiME55oaUavFpAsySahxA==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-60_Scananalog.sdfa</Filename>
      <Signature>IJPtcWUbA/zhqlfw88DfzEm8UqTdMqX0+6PJHTZ9SegWNXN7RLwE1Alv8f0mI148V/g7pcX7Vbw7vr7Otrrx+Q==</Signature>
    </FileSignature>
    <FileSignature>
      <Filename>ZB-EX-60_NE.sdfa</Filename>
      <Signature>cTjDVEpVVnh3BTVgUgnUKnx35/GjKKFHUmGefrNNmr3CEZRW+yEryDfKoRr/N4TZIrKywDDuVWcnkrn5/ctdLw==</Signature>
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>