﻿<?xml version="1.0" encoding="utf-8"?>
<!-- Created with exoImplantEditor CAD [Engine build 9562] -->
<ImplantLibraryEntry xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <RegistrationClickCenter>
    <x>3</x>
    <y>0</y>
    <z>10</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>1</x>
    <y>0</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>GenTek - Certain | TI-Base | Slim-Scanbody - FDA</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <Keyword>ZimVie_GenTek-CE-sb-slim_ti-base_fda</Keyword>
  <SupportOrientation>-1</SupportOrientation>
  <RegulatoryClearance IsDesignConstraint="true">FDA</RegulatoryClearance>
  <ReferenceHeightOffset>0</ReferenceHeightOffset>
  <Supplier>GenTek® by ZimVie</Supplier>
  <SupplierLink>https://www.zimvie.com</SupplierLink>
  <SupplierVersion>20260612</SupplierVersion>
  <LegalInformation>FDA cleared components – Design results generated with this library can only be milled by a validated milling center. Please get in contact with the component manufacturer for further information.</LegalInformation>
  <WarrantyInformation>DISCLAIMER OF WARRANTY
  
  
THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <PreviewV4IconFilename>preview.png</PreviewV4IconFilename>
  <SupplierV4IconFilename>ZimVieGenTek.png</SupplierV4IconFilename>
  <TypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBE_ZBCE34</Keyword>
      <AxisScrewChannel>
        <x>0</x>
        <y>0</y>
        <z>1</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>12</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <SupportFilename>ZFX11-ZB-CE-3440-ES__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-3440-ES__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-3447-ES__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-3447-ES__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-LGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBN_ZBCE34</Keyword>
      <AxisScrewChannel>
        <x>0</x>
        <y>0</y>
        <z>1</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-3440-NES__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-3440-NES__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-3447-NES__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-3447-NES__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | AS | CH0.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS03_ZBCE34</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>12</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°</DisplayInformation>
          <Keyword>H45_A00</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 5°</DisplayInformation>
          <Keyword>H45_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 10°</DisplayInformation>
          <Keyword>H45_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 15°</DisplayInformation>
          <Keyword>H45_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 20°</DisplayInformation>
          <Keyword>H45_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H45_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 25°</DisplayInformation>
          <Keyword>H45_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°</DisplayInformation>
          <Keyword>H57_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 5°</DisplayInformation>
          <Keyword>H57_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 10°</DisplayInformation>
          <Keyword>H57_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 15°</DisplayInformation>
          <Keyword>H57_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 20°</DisplayInformation>
          <Keyword>H57_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H57_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 25°</DisplayInformation>
          <Keyword>H57_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°</DisplayInformation>
          <Keyword>H70_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 5°</DisplayInformation>
          <Keyword>H70_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 10°</DisplayInformation>
          <Keyword>H70_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 15°</DisplayInformation>
          <Keyword>H70_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 20°</DisplayInformation>
          <Keyword>H70_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03E_H70_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 25°</DisplayInformation>
          <Keyword>H70_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | AS | CH0.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS03_ZBCE34</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A00</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 5°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 10°</DisplayInformation>
          <Keyword>H45_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 15°</DisplayInformation>
          <Keyword>H45_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 20°</DisplayInformation>
          <Keyword>H45_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H45_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 25°</DisplayInformation>
          <Keyword>H45_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°</DisplayInformation>
          <Keyword>H57_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 5°</DisplayInformation>
          <Keyword>H57_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 10°</DisplayInformation>
          <Keyword>H57_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 15°</DisplayInformation>
          <Keyword>H57_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 20°</DisplayInformation>
          <Keyword>H57_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H57_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 25°</DisplayInformation>
          <Keyword>H57_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°</DisplayInformation>
          <Keyword>H70_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 5°</DisplayInformation>
          <Keyword>H70_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 10°</DisplayInformation>
          <Keyword>H70_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 15°</DisplayInformation>
          <Keyword>H70_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 20°</DisplayInformation>
          <Keyword>H70_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34ASZ03N_H70_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 25°</DisplayInformation>
          <Keyword>H70_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | AS | CH1.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS13_ZBCE34</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>12</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°</DisplayInformation>
          <Keyword>H45_A00</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 5°</DisplayInformation>
          <Keyword>H45_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 10°</DisplayInformation>
          <Keyword>H45_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 15°</DisplayInformation>
          <Keyword>H45_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 20°</DisplayInformation>
          <Keyword>H45_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H45_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 25°</DisplayInformation>
          <Keyword>H45_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°</DisplayInformation>
          <Keyword>H57_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 5°</DisplayInformation>
          <Keyword>H57_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 10°</DisplayInformation>
          <Keyword>H57_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 15°</DisplayInformation>
          <Keyword>H57_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 20°</DisplayInformation>
          <Keyword>H57_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H57_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 25°</DisplayInformation>
          <Keyword>H57_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°</DisplayInformation>
          <Keyword>H70_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 5°</DisplayInformation>
          <Keyword>H70_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 10°</DisplayInformation>
          <Keyword>H70_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 15°</DisplayInformation>
          <Keyword>H70_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 20°</DisplayInformation>
          <Keyword>H70_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13E_H70_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 25°</DisplayInformation>
          <Keyword>H70_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | AS | CH1.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS13_ZBCE34</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°</DisplayInformation>
          <Keyword>H45_A00</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 5°</DisplayInformation>
          <Keyword>H45_A05</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 10°</DisplayInformation>
          <Keyword>H45_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 15°</DisplayInformation>
          <Keyword>H45_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 20°</DisplayInformation>
          <Keyword>H45_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H45_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 25°</DisplayInformation>
          <Keyword>H45_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°</DisplayInformation>
          <Keyword>H57_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 5°</DisplayInformation>
          <Keyword>H57_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 10°</DisplayInformation>
          <Keyword>H57_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 15°</DisplayInformation>
          <Keyword>H57_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 20°</DisplayInformation>
          <Keyword>H57_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H57_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 25°</DisplayInformation>
          <Keyword>H57_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°</DisplayInformation>
          <Keyword>H70_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 5°</DisplayInformation>
          <Keyword>H70_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 10°</DisplayInformation>
          <Keyword>H70_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 15°</DisplayInformation>
          <Keyword>H70_A15</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 20°</DisplayInformation>
          <Keyword>H70_A20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS13N_H70_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 25°</DisplayInformation>
          <Keyword>H70_A25</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-34__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT3210__implant.stl</ImplantFilename>
      <DisplayInformation>3.4mmD | CE | AS | CH2.6 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS26_ZBCE34</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P34</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>12</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°</DisplayInformation>
          <Keyword>H45_A00</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 5°</DisplayInformation>
          <Keyword>H45_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 10°</DisplayInformation>
          <Keyword>H45_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 15°</DisplayInformation>
          <Keyword>H45_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 20°</DisplayInformation>
          <Keyword>H45_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H45_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 25°</DisplayInformation>
          <Keyword>H45_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°</DisplayInformation>
          <Keyword>H57_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 5°</DisplayInformation>
          <Keyword>H57_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 10°</DisplayInformation>
          <Keyword>H57_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 15°</DisplayInformation>
          <Keyword>H57_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 20°</DisplayInformation>
          <Keyword>H57_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H57_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 25°</DisplayInformation>
          <Keyword>H57_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_00G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°</DisplayInformation>
          <Keyword>H70_A0-25</Keyword>
          <AxisScrewChannel>
            <x>0</x>
            <y>0</y>
            <z>1</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_05G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 5°</DisplayInformation>
          <Keyword>H70_A05</Keyword>
          <AxisScrewChannel>
            <x>-0.08715574274765817</x>
            <y>0</y>
            <z>0.9961946980917455</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_10G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 10°</DisplayInformation>
          <Keyword>H70_A10</Keyword>
          <AxisScrewChannel>
            <x>-0.17364817766693033</x>
            <y>0</y>
            <z>0.984807753012208</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_15G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 15°</DisplayInformation>
          <Keyword>H70_A15</Keyword>
          <AxisScrewChannel>
            <x>-0.25881904510252074</x>
            <y>0</y>
            <z>0.9659258262890683</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_20G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 20°</DisplayInformation>
          <Keyword>H70_A20</Keyword>
          <AxisScrewChannel>
            <x>-0.3420201433256687</x>
            <y>0</y>
            <z>0.9396926207859084</z>
          </AxisScrewChannel>
          <ImplantConnection>
            <ID>ZI_C_P34</ID>
          </ImplantConnection>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11ZB-CE34AS26E_H70_25G__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11ZB-CE34AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 25°</DisplayInformation>
          <Keyword>H70_A25</Keyword>
          <AxisScrewChannel>
            <x>-0.42261826174069944</x>
            <y>0</y>
            <z>0.9063077870366499</z>
          </AxisScrewChannel>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBE_ZBCE41</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-4140-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-4140-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-4147-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-4147-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-LGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBN_ZBCE41</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-4140-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-4140-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-4147-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-4147-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | AS | CH0.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS03_ZBCE41</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728177</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.85</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.85</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.85</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | AS | CH0.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS03_ZBCE41</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728177</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>-0.1</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41ASZ03N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | AS | CH1.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS13_ZBCE41</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | AS | CH1.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS13_ZBCE41</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>0.8</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS13N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-41__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT410__implant.stl</ImplantFilename>
      <DisplayInformation>4.1mmD | CE | AS | CH2.6 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS26_ZBCE41</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS26E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.6</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS26E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE41AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE41AS26E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBE_ZBCE50</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5040-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5040-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5047-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5047-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-LGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBN_ZBCE50</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5040-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5040-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5047-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5047-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | AS | CH0.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS03_ZBCE50</Keyword>
      <AxisScrewChannel>
        <x>0</x>
        <y>0</y>
        <z>1</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | AS | CH0.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS03_ZBCE50</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | AS | CH1.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS13_ZBCE50</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | AS | CH1.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS13_ZBCE50</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>0.5</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.95</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-50__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT510__implant.stl</ImplantFilename>
      <DisplayInformation>5.0mmD | CE | AS | CH2.6 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS26_ZBCE50</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBE_ZBCE60</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5040-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5040-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5047-EL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5047-EL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-LGTS__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBN_ZBCE60</Keyword>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5040-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5040-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.0 | 0°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H40_A00</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <SupportFilename>ZFX11-ZB-CE-5047-NEL__2pasupport.sdfa</SupportFilename>
          <InterfaceFilename>ZFX11-ZB-CE-5047-NEL__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.7 | 0°</DisplayInformation>
          <IsWithInterface>true</IsWithInterface>
          <Keyword>H47_A00</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | AS | CH0.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS03_ZBCE60</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | AS | CH0.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS03_ZBCE60</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50ASZ03N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50ASZ03N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | AS | CH1.3 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS13_ZBCE60</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.7</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTN__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | AS | CH1.3 | Non-Engaging</DisplayInformation>
      <IsWithRotationLock>false</IsWithRotationLock>
      <Keyword>TBNAS13_ZBCE60</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>0</ReferenceRotationOffset>
      <RotationLockCount>0</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>5.2</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS13N_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>false</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS13N_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.92</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <AxisAsymmetric>
        <x>1</x>
        <y>0</y>
        <z>0</z>
      </AxisAsymmetric>
      <MarkerFilename>ZFX05Z-ZB-CE-60__scanbody.stl</MarkerFilename>
      <ScrewFilename>ZFX09-ZB-CE-HLGTE__screw.sdfa</ScrewFilename>
      <ImplantFilename>XIFNT610__implant.stl</ImplantFilename>
      <DisplayInformation>6.0/5.0mmD | CE | AS | CH2.6 | Engaging</DisplayInformation>
      <IsWithRotationLock>true</IsWithRotationLock>
      <Keyword>TBEAS26_ZBCE60</Keyword>
      <AxisScrewChannel>
        <x>-0.01745240643728351</x>
        <y>0</y>
        <z>0.9998476951563913</z>
      </AxisScrewChannel>
      <ImplantConnection>
        <ID>ZI_C_P40</ID>
        <ID>ZI_C_P50</ID>
        <ID>ZI_C_P60</ID>
      </ImplantConnection>
      <ReferenceRotationOffset>30</ReferenceRotationOffset>
      <RotationLockCount>6</RotationLockCount>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H45__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H4.5 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H45_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H45__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4.8</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H57__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H5.7 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H57_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H57__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <InterfaceFilename>ZFX11ZB-CE50AS26E_H70__2pa.sdfa</InterfaceFilename>
          <DisplayInformation>H7.0 | 0°-25°</DisplayInformation>
          <IsWithRotationLock>true</IsWithRotationLock>
          <Keyword>H70_A0-25</Keyword>
          <ClosedSupportFilename>ZFX11ZB-CE50AS26E_H70__2pasupport.stl</ClosedSupportFilename>
          <AxisScrewChannel>
            <x>-0.21643961393810288</x>
            <y>0</y>
            <z>0.9762960071199334</z>
          </AxisScrewChannel>
          <AxisScrewChannelMaxUserAngle IsDesignConstraint="true">25</AxisScrewChannelMaxUserAngle>
          <AxisScrewChannelMinUserAngle IsDesignConstraint="true">0</AxisScrewChannelMinUserAngle>
          <AngulatedScrewChannelBendPointHeight>4</AngulatedScrewChannelBendPointHeight>
          <AngulatedScrewChannelBendPointRadialPosition>1.25</AngulatedScrewChannelBendPointRadialPosition>
          <AngulatedScrewChannelDiameter>2.9</AngulatedScrewChannelDiameter>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>